[Services]
Check the layout before you order
We’ll show where desks and cabinets fit, how much space people have to pass and where a meeting room could go. We can review the floor plan together and look at the layout in 3D.

[Short answer]
What you can check in advance
Office design should connect the corporate identity with daily work: acoustics, ergonomics, storage, light and routes. PoMo translates the concept into furniture solutions that can be specified, ordered and installed.
We’ll start with the floor plan and what your team needs. Then we can tell you what furniture fits, what it will cost and when we can install it.
Get a preliminary estimate[Price of error]
What to check before ordering
If the design exists separately from the purchase, visually suitable furniture may not meet the size, deadline, budget or operating conditions.
coordinate materials on physical samples
check the feasibility of each position before visualization
[Expert review]
See how the furniture fits your office
For the task “Design and engineering of a modern office”, we are not checking a set of objects, but the connection between human behavior, layout, engineering and operation. The three criteria below must appear in the design before ordering.
Brand as a system of solutions
We translate the brand book into specific materials, finishing codes, contrasts, navigation and rules of use in different types of premises.
- Required evidence
- Palette of approved samples and application sheet by zone
- What fails if overlooked
- The corporate color is repeated mechanically, but the space does not convey the character of the brand and quickly becomes outdated.
Physical sample and standard
We check the color, texture, joint of materials, fit and operation of mechanisms on the sample. Screen and render do not replace this check.
- Required evidence
- Signed finishing sample or assembled reference kit
- What fails if overlooked
- The lot is technically the same as the picture, but differs in tone, tactility or fit.
Dimensions and working clearances
We check the furniture not according to its nominal size, but together with the removal of the chair, opening of the facades, working passages and the route of entry.
- Required evidence
- Plan with dimensions of furniture, passages and opening areas
- What fails if overlooked
- During installation, tables are placed formally but block traffic, cabinets or doors.
[Result]
implementable concept without a gap between rendering and delivery
The work is based on four control points: initial data, planning solution, final specification, delivery and acceptance. Changes after approval are recorded and do not remain in correspondence.
- 01
Brief and plan
We collect staff, premises, restrictions, budget guidelines and launch date.
- 02
Planning and selection
We verify workstation fit, clearances, storage and building services, then compare compatible product ranges.
- 03
Specification
We record SKUs, dimensions, finishes, quantities, logistics, installation and approved substitutions.
- 04
Delivery and acceptance
We label each shipment by zone, assemble the furniture and close every item in the acceptance report.
[Catalog]
Furniture worth a closer look
Work tables and stations
Compare sizes and finishes. We’ll check what’s in stock and when it can be delivered.
Open catalogOffice chairs
Compare sizes and finishes. We’ll check what’s in stock and when it can be delivered.
Open catalogUpholstered furniture
Compare sizes and finishes. We’ll check what’s in stock and when it can be delivered.
Open catalogPartitions and screens
Compare sizes and finishes. We’ll check what’s in stock and when it can be delivered.
Open catalogOffice accessories
Compare sizes and finishes. We’ll check what’s in stock and when it can be delivered.
Open catalog[Q&A]
Questions about the solution “Design and engineering of a modern office”
Direct answers without unconfirmed prices, terms and local promises.
Discuss the problemWhat is included in the “Design and engineering of a modern office” solution?
The project includes analysis of initial data, verification of layout, selection of compatible series, line-by-line specification and agreed upon delivery and installation scenario. The exact composition depends on the object.
What should be checked before approving the solution?
If the design exists separately from the purchase, visually suitable furniture may not meet the size, deadline, budget or operating conditions. First things first: define visual language and real-life work scenarios
How should the completed result be accepted?
Result criterion: implementable concept without a gap between rendering and delivery. We check the layout, completeness, articles, finishes, assembly and comments on the document.
How is the cost calculated?
The cost is calculated after confirmation of layout, quantity, configurations, materials, address, logistics and installation. Unconfirmed prices are deliberately not published on the page.
Is it possible to implement the project in another city in Kazakhstan?
Yes. Design can be carried out remotely, and the route, packaging, installation and deadline are calculated for a specific city and site.
What information is needed to get started?
You need an up-to-date PDF or DWG, number of employees, list of premises, photographs of the facility, city, desired launch date and budget guideline.
[See also]
Related solutions
Turnkey office furnishings
Design, selection, specification, supply and installation of office furniture for companies in Almaty and throughout Kazakhstan.
More detailsOffice space planning
2D and 3D office planning: workstations, aisles, meeting rooms, storage and team growth scenarios.
More detailsSelection of office furniture according to layout and budget
Professional selection of tables, chairs, storage and negotiation solutions with compatibility testing.
More details[Next step]
Get the project and line-by-line specification
Send us your plan and staffing program. We'll tell you what's missing for the calculation and suggest the next working step.
