[Office furniture systems]

Meeting room furniture systems

Table, chairs, display and connections are selected for participant count and meeting format, not for an empty shape on the floor plan.

Meeting room furniture systems — PoMo Union Office project

[Short answer]

What you can check in advance

Table, chairs, display and connections are selected for participant count and meeting format, not for an empty shape on the floor plan. The solution is tied to the plan, building services, actual workload and launch schedule, then recorded in a line-item specification.

We’ll start with the floor plan and what your team needs. Then we can tell you what furniture fits, what it will cost and when we can install it.

Get a preliminary estimate

[Price of error]

What to check before ordering

Choosing only by a picture or the price of one item makes the project impossible to control. The wrong table shape blocks sightlines, camera coverage, power access and participant movement.

01

Verify furniture dimensions, clearances and door movement on the current plan.

02

Check sightlines, cameras, microphones, displays and participant connections.

03

Coordinate power, cable routes and service access before ordering.

[Expert review]

See how the furniture fits your office

For the task “Furniture system for a meeting room,” we are not checking a set of objects, but the connection between human behavior, layout, engineering and operation. The three criteria below must appear in the design before ordering.

01

Dimensions and working clearances

We check the furniture not according to its nominal size, but together with the removal of the chair, opening of the facades, working passages and the route of entry.

Required evidence
Plan with dimensions of furniture, passages and opening areas
What fails if overlooked
During installation, tables are placed formally but block traffic, cabinets or doors.
02

Equal participation in a hybrid meeting

We check sightlines, camera frame, lighting, microphones, screen, power and the ability to display physical and digital content.

Required evidence
Furniture and AV equipment diagram with test call
What fails if overlooked
Some participants are not visible or audible, and the room is only open for face-to-face meetings.
03

Electrical and cable route

We associate sockets, floor hatches, screens, charging and service access with a specific table configuration before releasing an order.

Required evidence
Combined plan of furniture and engineering points
What fails if overlooked
Extensions cross aisles and hatches become under supports or inaccessible after assembly.

[Result]

The result is a documented “Meeting room furniture systems” solution that can be accepted against the plan, specification and delivered scope.

The work is based on four control points: initial data, planning solution, final specification, delivery and acceptance. Changes after approval are recorded and do not remain in correspondence.

  1. 01

    Brief and plan

    We collect staff, premises, restrictions, budget guidelines and launch date.

  2. 02

    Planning and selection

    We verify workstation fit, clearances, storage and building services, then compare compatible product ranges.

  3. 03

    Specification

    We record SKUs, dimensions, finishes, quantities, logistics, installation and approved substitutions.

  4. 04

    Delivery and acceptance

    We label each shipment by zone, assemble the furniture and close every item in the acceptance report.

[Catalog]

Furniture worth a closer look

All catalog series

Meeting tables

Compare sizes and finishes. We’ll check what’s in stock and when it can be delivered.

Open catalog

Office chairs

Compare sizes and finishes. We’ll check what’s in stock and when it can be delivered.

Open catalog

Office accessories

Compare sizes and finishes. We’ll check what’s in stock and when it can be delivered.

Open catalog

[Q&A]

Questions about “Meeting room furniture systems”

Direct answers without unconfirmed prices, terms and local promises.

Discuss the problem
What is included in “Meeting room furniture systems”?

The project includes analysis of initial data, verification of layout, selection of compatible series, line-by-line specification and agreed upon delivery and installation scenario. The exact composition depends on the object.

What should be checked before approving the solution?

Choosing only by a picture or the price of one item makes the project impossible to control. The wrong table shape blocks sightlines, camera coverage, power access and participant movement. First priority: Verify furniture dimensions, clearances and door movement on the current plan.

How should the completed result be accepted?

Result criterion: The result is a documented “Meeting room furniture systems” solution that can be accepted against the plan, specification and delivered scope. Check the plan, completeness, SKUs, finishes, assembly and recorded defects.

How is the cost calculated?

The cost is calculated after confirmation of layout, quantity, configurations, materials, address, logistics and installation. Unconfirmed prices are deliberately not published on the page.

Is it possible to implement the project in another city in Kazakhstan?

Yes. Design can be carried out remotely, and the route, packaging, installation and deadline are calculated for a specific city and site.

What information is needed to get started?

You need an up-to-date PDF or DWG, number of employees, list of premises, photographs of the facility, city, desired launch date and budget guideline.

[See also]

Related solutions

All pages of the section

Ergonomic office workstations

Desk, chair, screen, pedestal and power are designed as one workstation so employees can adjust their posture without losing useful space.

More details

Height-adjustable office workstations

Sit-stand desks encourage movement, but adjustment range, stability, controls and cable allowance must match actual users and equipment.

More details

Bench systems for 2, 4 and 6 employees

A bench system places several desks on one frame and saves space when screens, cables, supports and service access are planned together.

More details

[Next step]

Get the project and line-by-line specification

Send us your plan and staffing program. We'll tell you what's missing for the calculation and suggest the next working step.

Add project details

Have a floor plan? You can send it on WhatsApp.

Send your floor plan on WhatsApp

WhatsApp