[Space Type]
Acoustic booths and call areas
Selection and design: acoustic booths and call areas for a modern office.

[Short answer]
What you can check in advance
Acoustic booths remove some of the calls from open space, but require the correct number, ventilation, electrics and space without blocking escape routes.
We’ll start with the floor plan and what your team needs. Then we can tell you what furniture fits, what it will cost and when we can install it.
Get a preliminary estimate[Price of error]
What to check before ordering
If you choose furniture separately from the room scenario, the space loses capacity, convenience and integrity. Dimensions must be checked on the plan before ordering.
connect power and check ventilation
do not place booths in main aisles
[Expert review]
See how the furniture fits your office
For the “Acoustic Booths and Call Areas” task, we are not testing a set of objects, but rather the relationship between human behavior, layout, engineering and operation. The three criteria below must appear in the design before ordering.
Speech privacy and background
We divide the tasks: muffle a distracting conversation, hide the content of the conversation or isolate the call. Each problem requires its own set of solutions.
- Required evidence
- Map of noisy, quiet and private scenarios
- What fails if overlooked
- Screens create a visual boundary but do not address speech privacy or reduce distractions.
Electrical and cable route
We associate sockets, floor hatches, screens, charging and service access with a specific table configuration before releasing an order.
- Required evidence
- Combined plan of furniture and engineering points
- What fails if overlooked
- Extensions cross aisles and hatches become under supports or inaccessible after assembly.
Routes of people and services
We separate employees, visitors, queues, delivery and evacuation. Furniture should not turn a shortcut into a permanent detour.
- Required evidence
- Flow plan with peak usage scenarios
- What fails if overlooked
- The reception, kitchen or meeting room creates a traffic jam and distracts nearby workspaces.
[Result]
fully working zone without random items
The work is based on four control points: initial data, planning solution, final specification, delivery and acceptance. Changes after approval are recorded and do not remain in correspondence.
- 01
Brief and plan
We collect staff, premises, restrictions, budget guidelines and launch date.
- 02
Planning and selection
We verify workstation fit, clearances, storage and building services, then compare compatible product ranges.
- 03
Specification
We record SKUs, dimensions, finishes, quantities, logistics, installation and approved substitutions.
- 04
Delivery and acceptance
We label each shipment by zone, assemble the furniture and close every item in the acceptance report.
[Catalog]
Furniture worth a closer look
Partitions and screens
Compare sizes and finishes. We’ll check what’s in stock and when it can be delivered.
Open catalogOffice chairs
Compare sizes and finishes. We’ll check what’s in stock and when it can be delivered.
Open catalogOffice accessories
Compare sizes and finishes. We’ll check what’s in stock and when it can be delivered.
Open catalog[Q&A]
Questions about the solution “Acoustic booths and call zones”
Direct answers without unconfirmed prices, terms and local promises.
Discuss the problemWhat is included in the Acoustic Booths and Call Zones solution?
The project includes analysis of initial data, verification of layout, selection of compatible series, line-by-line specification and agreed upon delivery and installation scenario. The exact composition depends on the object.
What should be checked before approving the solution?
If you choose furniture separately from the room scenario, the space loses capacity, convenience and integrity. Dimensions must be checked on the plan before ordering. First of all: estimate the actual number of simultaneous calls
How should the completed result be accepted?
Result criterion: a fully functioning area without random objects. We check the layout, completeness, articles, finishes, assembly and comments on the act.
How is the cost calculated?
The cost is calculated after confirmation of layout, quantity, configurations, materials, address, logistics and installation. Unconfirmed prices are deliberately not published on the page.
Is it possible to implement the project in another city in Kazakhstan?
Yes. Design can be carried out remotely, and the route, packaging, installation and deadline are calculated for a specific city and site.
What information is needed to get started?
You need an up-to-date PDF or DWG, number of employees, list of premises, photographs of the facility, city, desired launch date and budget guideline.
[See also]
Related solutions
Furniture for the executive office
Selection and design: furniture for the executive office for a modern office.
More details[Next step]
Get the project and line-by-line specification
Send us your plan and staffing program. We'll tell you what's missing for the calculation and suggest the next working step.
